Polish company specialized in production of car/bicycle accessories seeks distributors

OFFER from Poland, reference: BOPL20190130001, valid from 31-01-2019 untill 08-02-2020

Business
  • Start date:
    31 januari 2019
  • End date:
    8 februari 2020
  • Summary:
    A Polish company located in South Central Poland is specialized in production of car and bicycle accessories. The company is looking for distribution services agreement from partners from the EU.
  • Description:
    South Central Polish company started as water meter production, now the company is the only producer and distributor in the country of the device to tire pressure gauge. The company has over 21 years of experience. The company is also a producer of car and bicycle accessories. The device to tire pressure gauge is used to monitor the pressure level in the wheels. Appropriate pressure is a very important element of everyday vehicle use.

    The device to tire pressure gauge is small and innovative, mounted on tyre of car or bicycle and is responsible for informing if tyre pressure is right. Too low tire pressure is responsible for an increase in rolling resistance by up to 4% and for accelerated tread wear even by more than 40%. This leads to greater susceptibility to punctures and tearing. These problems can be prevented by a properly functioning TPMS system (Tire Pressure Monitoring System) in the car. These problems result to a large extent from the lack of knowledge of drivers about how tire pressure control systems work. Their sensitivity varies, but for various reasons no such system reacts to small pressure losses.

    The air pressure in the wheels of the car changes naturally due to various factors, including temperature. The other pressure is therefore when the car is stationary, and the other during dynamic cornering. If Tire Pressure Monitoring Systems warned of a small loss of pressure in individual wheels, the driver would be bombarded with fault alarms - in many cases false. Meanwhile, even smaller pressure drops in the tires in the long run affect the grip and noise of tires, as well as its wear.

    Keeping pressure in wheels on a normal level creates optimal conditions for driving, that is:
    • reduces fuel consumption,
    • prevents tire deterioration and wear quickly,
    • ensures stable and safe driving.

    The device to tire pressure gauge is very simple to use:
    1. top up the pressure in the wheel to the nominal value (according to the car's manual);
    2. it should be remembered that the pressure in the wheels is measured only for cold tires;
    3. put a device on each wheel;
    4. tighten with fingers, until feel strong resistance;
    5. the indicators should extend together as shown in- picture 1;
    6. when the pressure drops by about 0.2 atm, the green indicator will drop showing a red tongue about 1 mm wide - picture 2;
    7. after noticing the change in the position of the indicators (pic. 2), the pressure in the tires should be topped up and the device should be screwed on again;
    8. the nuts are designed for wheels with a pressure of 1.4 atm. up to 3.0 atm.

    The company is constantly developing, investing in and researching new technologies to increase its production capacity, and therefore constantly exploring new markets and establishing cooperation with new partners.
    The company is looking for distribution services agreement in UE.
Partner Sought
  • Type of Partnership Considered:
    Distribution services agreement
  • Technical Specification or Expertise Sought:

    • the device is used to monitor the pressure level in the wheels;
    • the device is small and innovative device mounted on tyre of car or bicycle;
    • the device is informing if tyre pressure is right;
    •the air pressure in the wheels of the car changes naturally due to various factors, including temperature

    The company is looking for new partners for cooperation. The cooperation should be based on distribution services agreement. Partners should be from UE.

    SME 11-50,SME <10,>500 MNE,251-500,SME 51-250,>500

Organisation
  • Development stage:
    Already on the market
  • IPR Status:
  • Market keywords:
    Other electronics related (including alarm systems)
  • Technology keywords:
  • NACE keywords:
  • Advantages and Innovations:
    • device is responsible for informing if tyre pressure is right;
    • the device allows to immediately see when the wheels of car need air;
    • small and innovative device mounted on tyre of car or bicycle;
    • it replaces traditional valve locknuts and also signals a pressure drop;
    • the device is non-invasive and easy to assemble;
    • designed for passenger cars and motorcycles;
    • the company is the only producer and distributor in the country of the device
Client
  • Type and Size of Organisation:
    Industry SME 50-249
  • Already Engaged in Trans-National Cooperation
    Ja
  • Year Established:
    1997
  • Turnover:
    <1M
  • Country of origin:
    Poland
  • Languages spoken
    • English
    • Polish
Afbeeldingen
Images